Releases prior to Jan 2008 are documented in the Doorway Help system.8.20.00 22/1/08 Climate Notebook Export of graph snapshots USB licence token option supported Gateway and Router uses ExitDoorwayLevel 8.21.00 7/4/08 Print Page Select DataPoint style option *SMS command for text message through GSM phone 8.21.01 20/5/08 Generic Text page Time Zones corrected Start after Delay application (DWdelay) now allows 3rd party application startup 8.22.00 1/7/08 Local Gateway-Router idle option, previously was preset with Client 0 Driver syntax Dn(B) now handled as digital like Ls etc SeaChange SmartServer supported, select EINC and set Port=80 SeaChange generic page for serial adapter parameter setting 8.22.01 11/7/08 StartupWindow=0,0,0,0 now sets minimised as documented Synchronise SeaChange clocks *SEND *NOW /Lnn/onn/[s1] 8.23.00 1/11/08 Snapshots now collects IQ3 sensor labels DataEdit entry box increased from 128 to 150 characters Global Rescale enhanced, accepts user values and screen size up to 2560*1600 pixels 8.24.00 5/1/09 Text mode 'Enhanced' renamed 'Structured' to align with manufacturer DataPoint ToolTip now located above datapoint to facilitate legibility and mouse click 8.25.00 24/3/09 *EMAIL command to send messages and alarms by email Dynamic image decimal can show its value using new L syntax instead of D 8.26.00 27/11/09 Fixed bug in v8.25 where images would occasionally show file name on top of image 8.30.00 12/1/10 Controller Lists feature now fully supports IQ3 series Generic text page for Sensors now fully supports IQ3 series 8.30.01 16/1/10 Yellow DP entry box increased to 200 characters Blue JB entry boxes increased to 160 characters Alarm Retransmission entry box increased to 160 characters Loss of changed images after screen Minimised fixed 8.31.00 21/2/10 Modify, create and delete IQ3 series plot channels More syntax options to select plot channels connected to a sensor Chart extended to 1000 points 8.32.00 3/6/10 Hand-Off-Auto controls work correctly with IQ3 series 8.33.00 5/6/10 Button command *EXIT to close program from button 8.34.00 4/7/10 Server version now correctly locates SeaChange pages 8.35.00 6/8/10 Print Page new option for item only IC comms incorrectly sent to Doorway from IQ1+2 controllers are acknowledged so the controller does not become congested with retries New Generic text page for IC Comms with failure status indicators 8.36.00 23/8/10 *LOGEVENT command enhanced with fields for EventID and Category IQ3 with PIN=0 also sent encoded for *CREATE, *DELETE and List Plot Change 8.37.00 16/9/10 On licence validation failure the licence folder is indicated 8.38.00 8/10/10 New feature to produce alarms from page datapoints *ALARMSCAN (filter with addr=129) 8.39.00 20/11/10 Control Setting screen is now wider and allows horizontal scroll bar ManagerFull mode gives screen without menu or caption for Touchscreen PC Doorway Server Login screen has numbers pad for Touchscreen PC 8.40.00 26/1/11 Snapshot page data collection incomplete warning is to alarm panel only 8.40.01 15/2/11 Graph labels reordered to display longer labels better Knob and Switch adjustment now works with Synapsis SIP vIQ Map Identifier field increased from 15 to 20 chars and inv alarm addresses masked out BMSType = e allows writing from a datapoint eg W1(S=I) 8.41.00 17/5/11 Export List v2 with combined Date+Time field 8.42.00 13/7/11 Corrected Map omission of IQ type details 8.43.00 4/11/11 Time Zone support incresed from 5 to 8 for use with IQ3 controllers 8.44.00 10/1/12 Enlarge knob adjustment buttons for use with Touchscreens Engineering screen now shows current PIN Add to IP selections 127.0.0.1 Loopback 8.45.00 13/1/12 SMS alarm queue management *SMSQUEUE command 8.46.00 6/2/12 Snapshots Find Record screen capacity increased